Here's a step-by-step guide on the toilet replacement process:
# Preparation
1. *Shut off the water supply*: Locate the shut-off valve behind the toilet and turn it clockwise to shut off the water supply to the toilet.
2. *Drain the tank and bowl*: Flush the toilet to drain the tank and bowl.
3. *Disconnect the water supply line*: Use a wrench to loosen the nut holding the water supply line to the toilet. Once loose, you should be able to remove the line from the toilet.
# Removing the Old Toilet
1. *Disconnect the drain line*: Use a wrench to loosen the nut holding the drain line to the toilet. Be prepared for any remaining water to spill out.
2. *Remove the toilet from the floor*: Use a wrench to loosen the nuts holding the toilet to the floor. You may need to rock the toilet back and forth to break the seal.
3. *Carefully lift the toilet*: Use a dolly or lift the toilet with a friend's help to remove it from the bathroom.
# Installing the New Toilet
1. *Inspect and clean the flange*: Inspect the flange (the rubber gasket that seals the toilet to the floor) for any damage or mineral buildup. Clean or replace the flange as needed.
2. *Install the new toilet*: Place the new toilet over the flange, ensuring it's centered and secure.
3. *Tighten the toilet to the floor*: Use a wrench to tighten the nuts holding the toilet to the floor. Be careful not to overtighten.
4. *Reconnect the drain line*: Place the drain line over the toilet's drain outlet and secure it with the nut. Tighten the nut by hand, then use a wrench to tighten an additional 1-2 turns.
5. *Reconnect the water supply line*: Place the water supply line over the toilet's inlet and secure it with the nut. Tighten the nut by hand, then use a wrench to tighten an additional 1-2 turns.
# Final Touches
1. *Turn on the water supply*: Turn the shut-off valve counterclockwise to restore water supply to the toilet.
2. *Test the toilet*: Flush the toilet several times to test for leaks and proper function.
3. *Secure the toilet seat and lid*: Install the toilet seat and lid, ensuring they're securely fastened.
Remember to always follow local plumbing codes and regulations, and consider hiring a professional if you're not comfortable with the installation process.
We always recommend hire a License Plumber
All Cool Heat Plumbing & General Contractor
(407)461-0301
